the design and style of led street light

Time:2014/7/31  keywords:led street light


An  LED Street Light   is an integrated light that uses light emitting diodes (LED) as its light source. These are considered integrated lights because, in most cases, the luminaire and the fixture are not separate parts (except LEDGine-based luminaires). New in manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture.   Different designs have been created that incorporate various types of LEDs into a light fixture. The current trend is to use high power 1 watt LEDs. However, some companies use low power LEDs in their products, including several low power LEDs packed together to perform the same purpose as a single high power LED. The shape of the LED street light depends on several factors, including LED configuration, the heat sink used with the LEDs and aesthetic design preference.   Heat sinks for LED street lights are similar in design to heat sinks used to cool other electronics such as computers. Heat sinks tend to have as many grooves as possible to facilitate the flow of hot air away from the LEDs. The area of heat exchange directly affects the lifespan of the LED street light.   The lifespan of an LED street light is determined by its light output compared to its original design specification. Once its brightness decreases by 30 percent, an LED street light is considered to be at the end of its life.   Most LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the back side of a high-pressure sodium lamp. In this case, much of the luminance of the light is lost and produces light pollution in the air and surrounding environment. Such street lights can also cause glare for drivers and pedestrians.   A drawback of LED focus panels is that most light is directed to the road, and less light to the footpaths and other areas. This can be addressed by the use of specialised lens design and adjustable mounting spigots.   E-lite semiconductor is a company focused on led street light , we have our own engineer to make different led light to satisfy your various choices . If need , feel free to contact with us . Or visit www.elitesemicon.com .

PRODUCTS

Sports Light & Flood light
    NEW Edge™ Glare-free Tennis Court Light
    NEW Edge™ 180LPW Sport & Flood Lighting
    NEW Edge™ 160LPW Sport & Flood Lighting
    LitePro™ 140LPW Sport & Flood Lighting
Roadway Lighting
    Phantom™ Cobra Head Street Light
    Icon™ Tool-free Street Light
    Oasis™ 160LPW Street Light
    NEW Edge™ 180LPW Modular Street Light
High Bays for 80°C/176°F Ambient Temp
    NEW Edge™ 175LPW 80°C High Bay
    Edge™ 130LPW 80°C High Bay
Engineering & Heary-duty Lighting
    LED Victor™ Light
    LED Victor™ With Emergency Power Pack
    Hercu™ LED Bulk Head
Area Lighting & High Mast Lighting
    Orion™ 150LPW Shoebox Light
    Spider™ Garden Light
    NEW Edge™ 180LPW Area Light
    NEW Edge™ 160LPW Area Light
    NEW Edge™ 180LPW High Mast Light
    NEW Edge™ 160LPW High Mast Light
High Bays for General Uses
    Grapheneism™ 140LPW UFO High Bay
    LitePro™ Linea High Bay for High Rack Warehouses
    Apollo™ 170LPW High Bay
    LitePro™ High Power High Bay
    NEW Edge™ 180LPW High Bay
Wall Pack
    LitePro™ Adjustable Modular Wall Pack
    Diamond™ Die Cast Wall Pack
Canopy Lighting
    Stella™ LED Canopy Light
Tri - Proof Linear Luminaire
    Luna™ regular Tri - Proof Linear
    Luna™ Deep Dimming Tri - Proof Luminaire with Switchable CCT
System Introduction
    System Introduction

Application