In the physical design of led high bay , the first thing that needs to be considered is installation of fixture. It is always divided into hoisting and wall mounting in the factory lighting. Hosting is always installed in the top of factory while wall mounting is installed around the wall of factory. As the ordinary lighting, the most widely method is hoisting because it is able to make light evenly be distributed into the whole space of factory. On the contrary, wall mounting fixture always acts as significant lighting and supplementary lighting. So let’s learn how to install the hoisting LED High Bay.
1. In the installation position of LED High Bay, setup the hook ahead of time. There are two requirements about the Hook. Firstly, it is able to support the use of ring. Secondly, its bearing capacity must more than 30Kg.
2. Insert the ring of fixture into hook which is fixed. In this way, the fixture is lifted by ring.
3. Connected the power wire in the factory and fixture. Brown wire should be linked in L wire, Blue wire should be linked in N wire and the yellow line should be linked in earth wire. Besides, it’s necessary to deal with waterproof and insulation.
4. Switch on the power and make sure whether LED High Bay operates well or not. If everything is ok, the installation procedure is over.
1. Cut off power when installing LED High Bay or replacing accessories.
2. When link in power, make sure the input voltage match LED High Bay.