The Theory Comparison between LED Flood Lights & CFL

Time:2017/6/20  keywords:LED Flood Lights, CFL

      In fixture marketing, LED light and CFL are the most popular fixtures. Due to the difference working theory, their features are not the same. Now let's focus on the theory comparison between  LED Flood Lights   s and CFL.

LED Flood Lighting.jpgThe kernel of LED flood lights is light emitting diode, which is called LED for short. It is a kind of solid-state semiconductor device, with the ability of converting electric energy into light energy. LED chip is attached in bracket; one end is negative pole while the other end is connected in the positive pole of LED driver. In this way, the whole chip is packaged by epoxy resin. In LED flood lights fixtures, it is constituted by three parts, N layer from N-type semiconductor, P layer from P-type and the active layer in the middle. After added forward biased, the electron holes in P-type area diffuse towards negative direction and enter active area. Meanwhile, electrons in N-type area diffuse towards positive direction and also enter active area. When the electrons and holes combine together, the fixture will give out light spontaneously. We always see different colors of light in the street, red, orange, yellow, green, blue and so on. How does it form? It's owing to different materials. In addition, LED light fixture would become much brighter with the increase of positive current. In a word, the stability of LED light beam is affected by the stability of current.

As a matter of fact, CFL is a kind of compact fluorescent lamp with personal ballast. When turn on CFL, it would firstly pass through electronic ballast to heat the lamp filament of tube. Next, the lamp filament would emit electron. These electrons would collide with argon atoms in the tube. As a result, the argon atoms have got energy to collide with mercury atoms. After absorbed energy, these mercury atoms occur to jump to generate ionization, which forms into plasma state in tube. In this condition, the voltage between the two ends of tube is connected to send out ultraviolet ray, which evokes fluorescent powder give out light. 


Sports Light & Flood light
    NEW Edge™ Glare-free Tennis Court Light
    NEW Edge™ 180LPW Sport & Flood Lighting
    NEW Edge™ 160LPW Sport & Flood Lighting
    LitePro™ 140LPW Sport & Flood Lighting
Roadway Lighting
    Phantom™ Cobra Head Street Light
    Icon™ Tool-free Street Light
    Oasis™ 160LPW Street Light
    NEW Edge™ 180LPW Modular Street Light
High Bays for 80°C/176°F Ambient Temp
    NEW Edge™ 175LPW 80°C High Bay
    Edge™ 130LPW 80°C High Bay
Engineering & Heary-duty Lighting
    LED Victor™ Light
    LED Victor™ With Emergency Power Pack
    Hercu™ LED Bulk Head
Area Lighting & High Mast Lighting
    Orion™ 150LPW Shoebox Light
    Spider™ Garden Light
    NEW Edge™ 180LPW Area Light
    NEW Edge™ 160LPW Area Light
    NEW Edge™ 180LPW High Mast Light
    NEW Edge™ 160LPW High Mast Light
High Bays for General Uses
    Grapheneism™ 140LPW UFO High Bay
    LitePro™ Linea High Bay for High Rack Warehouses
    Apollo™ 170LPW High Bay
    LitePro™ High Power High Bay
    NEW Edge™ 180LPW High Bay
Wall Pack
    LitePro™ Adjustable Modular Wall Pack
    Diamond™ Die Cast Wall Pack
Canopy Lighting
    Stella™ LED Canopy Light
Tri - Proof Linear Luminaire
    Luna™ regular Tri - Proof Linear
    Luna™ Deep Dimming Tri - Proof Luminaire with Switchable CCT
System Introduction
    System Introduction